Table of Contents
Advertisement
Manual Setup
If you know what sort of Internet service you have, you might try a
manual setup. For this, you will need a Wi-Fi-enabled smartphone,
tablet, or computer.
Connect to Your Router
Retrieve the network ID card from the foot of your new Belkin
Router.
[Diagram of bottom of the router showing service card – can be
obtained from "Tested QIG 2011 07 14.pdf" provided]
Can't find the card? The default network name and password are also printed on the foot of
the Router.
Use your computer, tablet, or smartphone to connect to the
wireless network shown on the network ID card.
[Diagram of connecting to SSID screenshot – needs creating, take
direction from "Tested QIG 2011 07 14.pdf" provided]
When requested, please enter the password (security key) provided
on the card.
Take a moment to look at the light on the front of the Router. If it
is solid blue, your Router was able to connect to the Internet
automatically.
[Image of front of the router with blue LED (needs creating)]
If not, please proceed to "Manually Set Up Your Internet
Connection" on page XX.
Advertisement
Table of Contents
