Fuse Replacement - Elenco Electronics M-1000B Operator's Instruction Manual

Failure to turn off the DMM before installing
the battery could result in damage to the
meter if the battery is connected to the
battery terminal incorrectly.

6-2. Fuse Replacement

This meter is provided with a 200mA/250V fuse to
protect 200mA, 2000mA, 20mA, 200mA ranges.
NOTE: The 10A circuit is not fused.
1. Turn off the power.
2. Remove the two screws from the back of the case.
3. Remove the fuse from the holder and replace it with
a new fuse of the specified value.
Fuse Numbers
• 200mA/250V Bussman Fuse #GMA 2/10
• 200mA/250V Little Fuse #235-200
• 200mA/250V Elenco Fuse #530020
CAUTION
-15-