Plasma Panel Replacement Method; Remove The; Remove The P(P-1)-Board; Remove The P(P-2)-Board - Panasonic TH-65PZ700A Service Manual
Hide thumbs
Also See for TH-65PZ700A:
- Brochure & specs (37 pages) ,
- Operating instructions manual (22 pages)
Table of Contents
Advertisement
6 Plasma panel replacement method
6.1.
Remove the Back cover
1. See Service Hint (Section 5)
6.2.
Remove the P(P-1)-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Disconnect the couplers (P2, P9, P11, P52, P54 and P56).
2. Remove the screws (×10
Board.
6.3.
Remove the P(P-2)-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Disconnect the couplers (P5, P10, P12, P23, P25, P51, P53
and P55).
2. Remove the screws (×9
) and remove the P(P-1)-
) and remove the P(P-2)-Board.
TH-65PZ700A / TH-65PY700AZ / TH-65PY700H / TH-65PY700M / TH-65PY700MR
6.4.
Remove the Rear terminal
cover
1. Remove the screws (×4
2. Remove the Rear terminal cover.
11
, ×7
, ×2
).
Advertisement
Table of Contents
