Plasma Panel Replacement Method; Remove The; Remove The Rear Terminal Cover; Remove The P(P-1)-Board - Panasonic TH-65PV600A Service Manual

6 Plasma panel replacement method

6.1. Remove the Back cover
1. See Service Hint (Section 5)
6.2. Remove the rear terminal
cover
1. Remove the screws (×4

2. Remove the rear terminal cover.

6.3.

Remove the P(P-1)-Board

Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Disconnect the couplers (P2, P9, P11, P52, P54 and P56).
2. Remove the screws (×10
Board.
, ×2 , ×4 ).
) and remove the P(P-1)-
6.4.

Remove the P(P-2)-Board

Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Disconnect the couplers (P5, P10, P12, P23, P25, P51, P53
and P55).
2. Remove the screws (×9
11
TH-65PV600A / TH-65PV600M
) and remove the P(P-2)-Board.