Toyota SIENNA 2022 Manual page 116

116
2-1. Instrument cluster
Select to change the tire pressure
warning system sensor ID code set.
To enable this function, a second
set of tire pressure warning system
sensor ID codes must be registered
by a Toyota dealer. For information
regarding changing the registered
ID code set, contact your Toyota
dealer.
• "Setting UNIT"
Select to change the units of the
tire pressure displayed.
 "Scheduled Maintenance"
(P.403)
Select to reset the scheduled main-
tenance information (message indi-
cating maintenance is required and
distance until the next mainte-
nance) after all maintenance is per-
formed.
 "Oil Maintenance" (P.415)
Select to reset the Oil maintenance.
Meter Settings
■
 "Language"
Select to change the language on
the multi-information display.
 "Units"
Select to change the units of mea-
sure displayed.
 Digital Speed (7-inch display)
Select to enable/disable the speed-
ometer display.
 EV indicator (P.80)
Select to enable/disable the EV
indicator.
 Driving information display
settings
Select to set up the following items.
• "Hybrid System"
Select to enable/disable the ECO
Accelerator Guidance (P.108).
• "Fuel Economy"
Select to change the average fuel
economy display (P.106).
 Audio settings
Select to enable/disable the audio
system-linked display.
 Vehicle information dis-
play settings
• "Display Contents"
Select to display the following
items.
"Energy monitor"
Select to enable/disable the Energy
monitor (P.122)
"AWD" (AWD models)
Select to enable/disable the AWD
system display (P.112).
• "Drive Info Type" (4.2-inch dis-
play)
Select to change the drive informa-
tion type between trip and total
(P.111).
• "Drive Info Items" (4.2-inch dis-
play)
Select to set the items on the upper
and lower side of the drive informa-
tion screen. from three items, aver-
age speed, distance and total time.
 "Trip Summary" (4.2-inch dis-
play)
Select to set the items displayed
when the power switch is turned off.
 "Pop-Up Display"