Toyota SIENNA 2022 Manual page 113

Safety system status (7-
■
inch display)
Enable/Disable the following
systems:
 PCS (Pre-Collision system)
(P.269)
 Intuitive parking assist (if
equipped) (P.311)
 BSM (Blind Spot Monitor)
(P.301)
 RCTA (Rear Cross Traffic
Alert) (P.301)
Settings display
Vehicle settings and the content
displayed on the screen can be
changed by using the meter
control switches.
Setting procedure
■
4.2-inch display

1
Press or
control switches and select
.
2
Press or
control switches and select
the desired item.
7-inch display

1
Press or
control switches and select
.
2
Press or
control switches and select
the desired item.
 If the function is turned on and
of the meter
of the meter
of the meter
of the meter
2-1. Instrument cluster
off or the volume, etc. is
changed on the setting
screen, the setting is changed
each time "OK" is pressed.
 For functions that allow oper-
ation contents, display con-
tents, etc., of function to be
selected, the setting screen is
displayed by pressing and
holding "OK". When the set-
ting screen is displayed,
select the setting or desired
value (time, etc.) with "OK".
3
After changing the settings,
press of the meter control
switches to return to the pre-
vious screen.
Setting items
■
 LTA (Lane Tracing Assist)
(P.277)
Select to set up the following items.
• "Lane Center"
Select to enable/disable the lane
centering function.
• "Steering Assist"
Select to enable/disable steering
wheel assistance.
• "Alert"
Select to set the alert type.
• "Sensitivity"
Select to set the lane departure
alert sensitivity.
• "Sway Warning"
Select to enable/disable the vehicle
sway warning.
• "Sway Sensitivity"
113
2