Function Selector; Power Sources - Jensen CD-485 User Manual

1. TELESCOPIC ANTENNA
2. CD DOOR
3. TUNING CONTROL
+
4. SKIP BUTTON
-
5. SKIP BUTTON
6. STOP BUTTON
7. PLAY/PAUSE
8. PROGRAM (PROG) BUTTON
9. REPEAT BUTTON
10. VOLUME CONTROL
11. CARRYING HANDLE
12. FM STEREO INDICATOR
This unit operates on 120V~ 60Hz or 6 x DC1.5V "C" (UM-2) batteries. Do not attempt to operate
the unit on any other power source. You could cause damage to the unit and void your warranty.
Please be sure the power outlet you plug this unit into is working and receives constant
(unswitched) power.
AC OPERATION
Plug the detachable AC cord into a standard AC outlet (120V~60Hz).
When the AC power cord (included) is connected to the AC POWER JACK (#20) on the
1.
back of the unit and the other end is plugged into a 120V AC~ 60Hz wall outlet, the unit will
disconnect the batteries automatically, and operate on AC Power only.
Slide the FUNCTION SELECTOR (#23) to "CD/AUX" position for CD/AUX play, "FM" for FM
2.
radio, "AM" for AM radio and "POWER OFF" for unit power off.
WARNING:
Before connecting to the power outlet, ensure that the outlet corresponds to the information
•
on the rating label at the bottom of the apparatus.
BUTTON

POWER SOURCES

13. POWER INDICATOR
14. LED DISPLAY
15. PLAY/PAUSE INDICATOR
16. REPEAT INDICATOR
17. PROGRAM (PROG) INDICATOR
18. RIGHT SPEAKER
19. LEFT SPEAKER
20. AC POWER JACK
21. HEADPHONE JACK
22. AUX-IN JACK

23. FUNCTION SELECTOR

(POWER OFF - AM - FM – CD/AUX)
E-6