Replacing The Plinth Filter - Miele TXR 860 WP Operating Instructions Manual

Replacing the plinth filter

The heat exchanger can clog up.
Replace the plinth filter immediately
if you see the following signs of wear
before or after cleaning (optional
accessory).
Poor fit
The edges of the plinth filter do not sit
properly and the plinth filter is
deformed. Lint will blow into the heat
exchanger unfiltered through edges that
do not sit properly. This will cause a
permanent obstruction in the heat
exchanger.
Frequently Asked Questions
Deformation
Deformations indicate that the plinth
filter has become worn.
65