Miele TXR 860 WP Operating Instructions Manual page 23

Useful tip: To postpone setup until
later: touch the Skip
following message will then appear in
the display:

It is possible to set up later in "Settings" /
"Miele@home".
Confirm with the

Via WPS
 Select the connection method you
wish to use.
You will then be guided by the display
and the Miele@home app.
You will require a WPS-compatible
router for the Via WPS connection type.
 Activate the WPS function on your
router within 2 minutes.
Setting the clock format
The time of day can be displayed in 12-
hour or 24-hour clock format.
 Select the clock format you want and
confirm this with the
button.
The display will change to the next
setting.
sensor button. The
OK sensor button.
OK sensor
Initial commissioning
Setting the time
This message only appears if the
tumble dryer has not yet been
connected to a WiFi network.
The time is set automatically when a
connection is established with a WiFi
network.
 Clock display
Via App
 Place your finger on the number that
you want to change and move your
finger in the direction you want.
 Confirm with the
Further information will appear on the
display.
Continuing with
commissioning
 Please see "1. Notes on correct
laundry care".
 You can then select a program and
load the tumble dryer as described in
"2. Loading the tumble dryer" and "3.
Selecting a program".
The procedure for initial commissioning
is completed when a program lasting
longer than one hour has been carried
out in full.
14 02
13 01
12 00
11 59
10 58
sensor button.
OK
OK
23