Advertisement
Package Contents
The following items are included in the shipping container:
Notes:
•
A4/Letter sheet paper (not included) is needed for printhead
alignment during set-up.
•
LAN not included (needed if LAN connection required).
1 - Printer
2 - Multi-sheet Tray
3 - Documentation:
- Assy Instructions
- Quick Start Guide
4 - Screwdriver
5 - Black Knobs
6 - Power Cords
7 - Cartridges
Installation Notes
• To unpack the printer, you need at least 6.5 feet at the side. The
crate size is:
Length: 52 inches
-
-
Width: 22.4 inches
-
Height: 25 inches
• Tools required: Screwdriver (included)
• Two people are required to perform some tasks.
• Time required to assemble the printer is approximately 100
minutes.
Page
2
8- Stand Pieces:
- Metal Stoppers
- Right Leg
- Right Foot
- Basket Frame
- Crossbrace
- Left Foot
- Left Leg
9 - Re-feed Preventers
Unpack Printer Stand
1. Cut the straps and open the box.
Important
To avoid scratches, install a blanket on the floor.
2. Remove the documentation and carton tray on top of the printer.
1
3. Remove the stand accessories from the tray:
-
Metal stoppers [1]
-
Right Leg [2]
-
Right Foot [3]
-
Basket Frame [4]
1
8
7
4. Locate and remove the packaged multi-sheet tray inside one of the
legs.
5. Remove the foam piece (keep it for use in the following steps) and
unpack the multi-sheet tray.
Perfecta
-
Screwdriver [5]
-
Crossbrace [6]
-
Left Foot [7]
-
Left Leg [8]
6
®
2400STP Assembly Instructions
2
2
3
4
5
Advertisement
