Menu Operation; Picture Menu - BenQ X12000 User Manual

Menu operation

Please note that the on-screen display (OSD) menus vary according to the signal type selected and the
projector model you are using.
The menu items are available when the projector detects at least one valid signal. If there is no
equipment connected to the projector or no signal detected, limited menu items are accessible.

PICTURE menu

The projector is preset with several predefined picture modes so that you can
choose one to suit your operating environment and input signal picture type.
• Bright: Maximizes the brightness of the projected image. This mode is suitable
• Vivid: Being slightly brighter than Cinema mode, it is suitable for playing movies
• Cinema: With well-balanced color saturation and contrast with a low brightness
Picture Mode
• DCI-P3: The color space is close to the DCI standard used by digital cinema
• Silence: Minimizes the acoustic noise. It is suitable for the need of watching
• User 1/User 2: Recalls the settings customized based on the current available
There are two user-definable modes if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the User
1/User 2) as a starting point and customize the settings.
• Load Settings From
1. Go to PICTURE > Picture Mode.
2. Press
User Mode
3. Press
Management
4. Select Load Settings From and press OK.
5. Press
6. Press OK and BACK to return to the PICTURE menu.
7. Press
for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
in rooms where there is a small amount of ambient light, e.g. your living room.
level, this is most suitable for enjoying movies in a totally dark environment (as you
would find in a commercial cinema).
movie theaters.
movies that requires an ultra-quiet environment so that you won't be disturbed by
the noise of the projector. When this mode is used, the following menu functions
will be automatically changed to the designated settings and grayed out.
• XPR: Off
• Light Mode: Economic
picture modes. See User Mode Management on page
/ to select User 1 or User 2.
to highlight User Mode Management, and press OK. The User
Mode Management page is displayed.
/ to select a picture mode that is closest to your need.
to select the sub-menu items you want to change and adjust the values
with / . The adjustments define the selected user mode.
23.
Menu operation 23