Table of Contents
Advertisement
4. If you are prompted for a password, press the arrow keys to enter a 6-digit password. See
the password function on page
5. Switch all of the connected equipment on.
6. The projector will search for input signals. The current input signal being scanned appears. If the
projector does not detect a valid signal, the message "No Signal" will continue displaying until an
input signal is found.
You can also press SOURCE to select your desired input signal. See
21.
• Please use the original accessories (e.g. power cord) to avoid possible dangers such as electric shock and fire.
• The Setup Wizard screenshots are for reference only and may differ from the actual design.
• If the frequency/resolution of the input signal exceeds the projector's operating range, you will see the message
"Out of Range" displayed on the background screen. Please change to an input signal which is compatible with
the projector's resolution or set the input signal to a lower setting. See
• If no signal is detected for 3 minutes, the projector automatically enters saving mode.
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and
settings.
The OSD screenshots below are for reference only, and may differ from the actual design.
Below is the overview of the OSD menu.
1
PICTURE
2
Picture Mode
User Mode Management
Brightness
Contrast
3
Color
Tint
Sharpness
Advanced
Reset Current Picture Mode
PC
4
To access the OSD menu, press MENU on the projector or remote control.
• Use the arrow keys ( / / / ) on the projector or remote control to move through the menu items.
• Use OK on the projector or remote control to confirm the selected menu item.
20.
DCI-P3
50
50
50
50
5
Exit
6
Switching input signal on page
Timing chart on page
Main menu
1
icon
Main menu
2
5
Sub-menu
3
Utilizing
37.
Current input signal
4
Status
5
Press BACK to go
to the previous page
6
or to exit.
Operation
19
Advertisement
Table of Contents
