Note:
- Signals other than above may not be displayed properly.
- Applicable input signal for PC is basically compatible to VESA
standard timing.
- PC signal is magnified or compressed for display, so that it may not
be possible to show fine detail with sufficient clarity.
4. Self Check Function
4.1. Self Check
1. Self-Check is used to automatically check the bus lines and
hexadecimal code of the TV set.
2. To get into the Self -Check mode press the Down (
the customer controls at the front of the set, at the same time
pressing the Status/Information (
control, and the screen will show :
) button on the remote
6
) button on