Self Check Function; Self Check; Power Led Blinking Timing Chart - Panasonic TX-32LX75Y-IRAN Service Manual

4 Self Check Function

4.1.

Self Check

1. Self-Check is used to automatically check the bus lines and hexadecimal code of the TV set.
2. To get into the Self -Check mode press the Down button on the customer controls at the front of the set, at the same time
pressing the MENU button on the remote control, and the screen will show :
3. Turn off the TV to reset JPEG Viewer mode after SELF-CHECK.
4.2.

Power LED Blinking timing chart

1. Subject
Information of LED Flashing timing chart.
2. Contents
When an abonormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the
defective block can be identified by the number of blinking of the Power LED on the front panel of the unit.
7
TX-32LX75Y-IRAN