Table of Contents
Advertisement
4 Self Check Function
4.1.
Self Check
1. Self Check is used to automatically check the bus lines and hexadecimal codes of the TV set.
2. To get into the Self Check mode, press the "DOWN" button on the customer's controls at the front of the set, at the same time
pressing the "MENU" button on the remote control. The screen that will show is represented by Figure 4.
3. Press both "OFF TIMER" button on the remote control and "DOWN" key button on the control panel.
4.2.
Power LED Blinking Timing Chart
1. Subject
Information of LED blinking timing chart.
2. Contents
When an abonormality has occurred in the unit, the protection circuit operates and resets to standby mode. At this time, the
defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.
Figure 4
7
TX-32LX800M-MALAYSIA
Advertisement
Table of Contents
