Advertisement
Contents
Connections
Firmware
Checks for and installs the latest firmware information updates and
upgrades. Also sets the upgrade notification message display.
o Check for Update
Check for firmware updates.
The firmware can be updated if a firmware update has been released.
Update Now:
Update Later:
0 This unit automatically retries updating if updating fails. If an update still
cannot be performed, an "Update Error" message appears in the display. See
"Troubleshooting" – "Update/upgrade error messages" for information on
update error messages. (v p. 133)
Check the conditions according to the message and try the update again.
0 This menu cannot be selected when "Allow Update" is set to "Off".
Front panel
Rear panel
Playback
Execute the update process. During the
update, the progress is shown on the
display.
Update later.
Remote control
unit
Settings
o Auto-Update
This unit will automatically update to the newest firmware when in
standby mode.
n Auto-Update
This unit will automatically update to the newest firmware when in
standby mode.
On:
Off
(Default):
n Time Zone
Change the time zone.
Set the time zone that matches the area where you live.
0 This menu cannot be selected when "Allow Update" is set to "Off".
0 When Time Zone is changed, the Time Zone setting for "Clock" in the menu
changes too. (v p. 97)
101
Index
Tips
Appendix
Turns on Automatic Updates.
Turns off Automatic Updates.
Advertisement
