Advertisement
Contents
Connections
Speaker Configuration
The speaker output characteristics are changed and settings are
configured according to your speakers.
o Amplifier Mode
This unit is loaded with 4 channels of output (SPEAKERS A (L/R),
SPEAKERS B (L/R)), for a maximum of two sets of speakers that
support a variety of playback methods. Connect and set up the
speakers for your preferred playback method in advance.
Front panel
Rear panel
Playback
Settings
Standard (A, B, or A+B)
(Default):
Parallel BTL:
Bi-Amp:
94
Remote control
unit
Tips
When either SPEAKERS A terminals or
SPEAKERS B terminals are connected
("Connecting speaker A (Standard
connection, Parallel BTL)" (v p. 23),
"Connecting speaker B" (v p. 24)) and
when both SPEAKERS A and B terminals
are connected as 2 sets of speakers in a
multi-drive connection, set (v p. 83).
The speakers for each channel are driven
by four amps built into this unit, and this is
effective for parallel BTL function which
realizes sound quality with damping
force. Set when speakers are connected
to the SPEAKERS A terminals.
(v p. 23)
Do not connect a speaker to the
0
SPEAKERS B terminal when "Parallel
BTL" is set.
Enables the bi-amp function. Set when
bi-amp is connected. (v p. 25)
Index
Appendix
Advertisement
