Removing The Support Struts - Bosch WNA14400IN Instruction Manual And Installation Instructions

Keep the screws and sleeves in
Note:
a safe place.
Take the hoses out of the holders.
1.
Unscrew and remove all four
2.
transport brace screws.
a) Remove the mains cable from the
holders.
Positioning and connecting
b) Remove the sleeves.
Fit the covers.
3.
Lock the covers firmly in place by
4.
applying pressure to the snap-in
hooks.

Removing the support struts

Unscrew and remove all screws in
1.
the vertical transport struts.
en
15