Packing Instructions - McIntosh C12000 Controller Owner's Manual

Packing Instructions

In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as
shown below. It is very important that the four plastic
feet are attached to the bottom of the equipment. This
will ensure the proper equipment location on the
bottom pad. Failure to do this will result in shipping
damage.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition.
If a shipping carton or any of the interior part(s)
are needed, please call or write Customer Service
Department of McIntosh Laboratory. Refer to Page 3.
Please see the Part List for the correct part numbers.
Note: The McIntosh C12000 Controller and C12000
Preamplifier use the same shipping carton.
Each unit carton includes separately packaged
accessories.
Top Foam
Pad
FOAM PLUG
Quantity Part Number Description
1 033838 Shipping carton only
2 034669 Side foam pad
1 033836 Inside carton only
1 034414 Top foam pad
1 034576 Bottom pad
4 017937 Plastic foot
4 400159 #10-32 x 3/4" screw
4 404080 #10-7/16" Flat washer
ACCESSORIES
Side Foam Pad
31