Navigating The Rear Panel (Preamp) - McIntosh C12000 Controller Owner's Manual

Navigating the Rear Panel (Preamp)

2PR
1PR
10PR
1PR RIGHT OUTPUT MAIN (Unbalanced) sends signals
to a Power Amplifier - Can be configued to use Solid
State or Tube amplification (see Page 29)
2PR RIGHT OUTPUT Balanced send signals to Power
Amplifier(s) and are switched On/Off using a trim
setting with the Front Panel Controls or Remote
Control Push-Buttons - Output 1 (1-SS) uses Solid
State amplification, Output 2 (2-T) uses Tube
Amplification
3PR RIGHT BALANCED INPUTS 1 thru 6 accept high
level program source signals
4PR RIGHT UNBALANCED INPUTS 1 thru 4 accept
high level program source signals
5PR PH1 (Right and Left channels) accept signals from a
Phono Cartridge
3PR 4PR 5PR
11PR 12PR
6PR LEFT UNBALANCED INPUTS 1 thru 4 accept high
level program source signals
7PR LEFT BALANCED INPUTS 1 thru 6 accept high
level program source signals
8PR LEFT OUTPUT Balanced send signals to Power
Amplifier(s) and are switched On/Off using a trim
setting with the Front Panel Controls or Remote
Control Push-Buttons - Output 1 (1-SS) uses Solid
State amplification, Output 2 (2-T) uses Tube
Amplification
9PR LEFT OUTPUT MAIN (Unbalanced) sends signals
to a Power Amplifier - Can be configued to use Solid
State or Tube amplification (see Page 29)
10PR RIGHT OUTPUT REC/FIXED sends signals to the
input of a recording device
6PR 7PR
13PR 14PR
11PR
12PR GND terminals accept a ground wire from a turntable
13PR PH2 (Right and Left channels) accepts signals from a
14PR
15PR LEFT OUTPUT REC/FIXED sends signals to the
8PR
9PR
15PR
RIGHT INPUT Connector accepts the custom McIntosh
23-Conductor Cable. This cable connects to the C12000
CONTROLLER OUTPUT. It supplies the control signals
and power supply voltages for the Right Channel Circuitry
in the Preamplifier
Phono Cartridge
LEFT INPUT Connector accepts the custom McIntosh
23-Conductor Cable. This cable connects to the C12000
CONTROLLER OUTPUT. It supplies the control signals
and power supply voltages for the Left Channel Circuitry
in the Preamplifier
input of a recording device
11