Viewer Preference; Adjust Viewer Preference - ATEN KN8100V Series User Manual

KVM over IP User Manual

Viewer Preference

This section only appears in the browser version of the User Preferences page
and is mainly concerned with the automatic viewer selection of the system.
To choose a viewer manually, refer to Connecting to a Port, page 226.
Usable viewers are automatically determined by the status of the system at the
time of the login and by the type of browser.
When you try to connect to a port (double-click the port or select a port and
click the Connect), the system will use the viewer according to the viewer list.
An example is shown below:
 The top-most method is the most preferred method and is listed as #1
(Web Client by default).
 If the preferred method is supported when connecting to a port, the system
will try connecting using the preferred method.
 If the method is not supported, the system will try connecting using the
next method, and try the last method last.

Adjust Viewer Preference

Follow the steps below to adjust the preference.
1. Click to select and highlight the method. The #2 Java Client method is
shown above as the selected.
2. Click the up
brings it up (more preferred) while the down arrow
(less preferred).
132
or down arrow to shift its position around. The up arrow
brings it down