Adjust Sound Volume (Buzzer Volume) - JRC JMA-7133-SA Instruction Manual

3.8.6

Adjust Sound Volume (Buzzer Volume)

When an alarm is activated, the operation panel issues an alarm audible to inform
user of the change of the condition.
The alarm sound can be adjusted by performing the following procedures.
Procedures
1) Open the Buzzer Volume menu by performing the menu
operation below.
Display Buzzer Volume menu will appear.
The volume of the alarm sound can be specified for each cause for alarm.
Level4
JMA-7100 Instruction Manual
Main
→ 7. Sub Menu
→
2. Brilliance Setting
indicates maximum volume and
Key ACK
: The operation key acknowledgement is set.
OPE Miss
: The incorrect operation alarm is set.
CPA/TCPA Alarm : The dangerous ship alarm is set.
New Target Alarm
: The automatic acquisition target alarm is set.
Lost Alarm
: The target lost alarm is set.
Navigation Alarm
: The navigation data abnormality alarm is set.
System Alarm
: The system abnormality alarm is set.
Inter Switch : The inter switch switching alarm is set.
3 －103
> >
3.BASIC OPERATION 3.8 APPLIED OPERATIONS
Level1
indicates minimum volume.
3