Steps
1. Align and place the base cover on the palm-rest assembly, and snap the base cover into place.
2. Tighten the eight captive screws to secure the base cover to the system.
Next steps
1. Install the
SIM card
tray.
2. Install the
SD
card.
3. Exit
service
mode.
4. Follow the procedure in
Solid-state drive
Removing the solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
SIM card
4. Enter
service
mode.
5. Remove the
base
cover.
20
Removing and installing components
After working on your
computer.
before working inside your
tray.
computer.