Furnace And Coil Attachment; Combustible Floor Base Accessory - Johnson Controls TM9T Series Installation Manual

1083286-UIM-L-1219
FIGURE 2: Furnace and Coil Attachment
DOWNFLOW DUCT CONNECTORS
All downflow installations must use a suitable duct connector approved
by the furnace manufacturer for use with this furnace. The duct connec-
tors are designed to be connected to the rectangular duct under the
floor and sealed. Refer to the instructions supplied with the duct con-
nector for proper installation. Refer to the separate accessory parts list
at the end of these instructions for the approved accessory duct con-
nectors.
6
FIGURE 3: Combustible Floor Base Accessory
FURNACE
WARM AIR PLENUM
WITH 1" FLANGES
FIBERGLASS
INSULATION
FIBERGLASS TAPE
UNDER FLANGE
COMBUSTIBLE FLOOR
BASE ACCESSORY
Johnson Controls Ducted Systems