Software Upgrade - Samsung HPS5033X Service Manual

3-5 Software Upgrade

3-5-1 USB Download Method
1. USB Memory Stick Path
Save as CADILLAC/USA/T-CADINUS0U/appl.rom
* Some of the USB Memory Sticks can be incompatible.
2. USB Download
1) Insert the USB Memory Stick to the rear SERVICE 1 port in Stand-by mode.
2) Turn the power on.
3) The blank screen is displayed for about one minute.
4) The Power is on again and picture appears.
5) Disconnect the power cord and connect again, then check the software version.
* Do not unplug the power cord in the step 3.
3-5-2 How to Check the Version of the Program
1. Procedures for checking in the User Menu
- Select the "Setup" menu in the Menu screen
- Place the cursor over the "On" of "Function Help", and press the "Info" key on the remote control
- The version of the program is displayed at the bottom of the Menu screen
2. Procedures for checking in the Factory Menu
When entering Factory Mode, the version of the software is displayed at the bottom of the menu as described on page 3-2.
Samsung Electronics
Alignment & Adjustment
Main Program Version
Boot-code Version
3-25