Samsung HPS5033X Service Manual page 116

12-1-10 Separation of ASSY BRACKET P-WALL
Part Name
Wall
① Remove 8 screws.
Bracket
: BH,+,B,M4,L12,ZPC(BLK)
② Remove 16 screws.
: BH,+,S,M4,L10,ZPC(BLK)
③ Remove Wall Bracket.
: Please lay the PDP panel face down on a soft surface
when separating front cover.
12-1-11 Separation of ASSY PCB P-SMPS & SMPS DC-DC
Part Name
SMPS
① Detach all connectors from the Assy PCB P-SMPS.
&
SMPS
② Remove 8 screws.
DC-DC
: PH,+,WWP,M3,L8,NI PLT
Board
③ Remove the Assy SMPS PCB.
④ Detach all connectors from the Assy SMPS DC/DC
Board.
⑤ Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
⑥ Remove the SMPS DC/DC Board.
: Wear gloves when handling the power board as there
may be some remaining electrical charge in the capacitor.
Specifically, avoid touching any part of the capacitor.
Samsung Electronics
Description
Description
Disassembly & Reassembly
Description Photo
Description Photo
12-5