Troubleshooting - LG CineBeam AU810PW Owner's Manual

52

TROUBLESHOOTING

Please check the list below when you experience the following symptoms during use of
the product. It may not be a failure.
Checklist for Safety (please check a long-used projector for safety
issues.)
Does your device have any of the following issues?
• The projector does not display anything on the screen or output sound when
it is turned on.
•
The product emits smoke or a burning smell.
•
Water or foreign substances are present inside the product.
•
Part of the projected image is cut out.
•
A strange noise (crackling or sparking sound) regularly occurs from inside the
projector.
• The projector still displays the screen or outputs sound when it is turned off.
• There are other errors or failures.
In this case, stop using the product.
• For safety, turn off the power switch and remove the plug from the socket.
•
Contact the place of purchase or authorised service centre for product
inspection.
• Do not attempt to repair the product yourself.
Abnormal behaviour
• There is a coloured dot (bright dots, dark dots, stationary dots, and/or
flickering dots) on the screen.
— This projector was produced with high precision technology. However,
a tiny dark or bright dot may appear on the screen. This is a common
occurrence due to the production process, and it does not indicate a
functional failure.
• The remote control may not work properly where a lamp with electronic
stabiliser or a three-wavelength lamp is installed.
— In this case, replace the lamp with electronic stabiliser or the three-
wavelength lamp with international standard products to ensure the
remote control works properly.