LG CineBeam AU810PW Owner's Manual page 130

[No Signal Image]
(Q. Settings)
You can turn on or off the image displayed when there is no signal.
Some models may not be supported.
• [On]
The default image is displayed if there is no signal.
• [Off]
The [No Signal] message is displayed if there is no signal.
[Eco Mode]
(Q. Settings)
Set power options to reduce energy consumption.
The name of this functions may differ depending on region.
• [Auto Power Off]
Set the projector to turn off automatically when there has been no user input
for a specified amount of time.
• [HDD Eco Mode]
If you set the mode to [On], the USB HDD connected to the projector will go into
power-saving mode when it has been left unattended for an extended period of
time.
[Home/Store Mode]
(Q. Settings)
You can choose between [Home Mode] and [Store Mode].
To use the projector at home, select [Home Mode].
Select [Store Mode] only when the projector will be displayed in store. The [Store
Mode] provide settings optimized for store display.
[General] [Additional Settings]
[General] [Additional Settings]
[General] [Additional Settings]
77
[No Signal Image]
[Eco Mode]
[Home/Store Mode]