LG CineBeam AU810PW Owner's Manual page 109

56
[Just Scan]
(Q. Settings)
If you turn this feature [On], you can view the content in the aspect ratio that is in
content source. If the edge of the screen is not clean, please turn it [Off].
If set to [Auto], the feature switches between [On] or [Off] status depending on the
information contained in the video signal.
• The items that can be selected may vary depending on the current input.
[Energy Saving]
(Q. Settings)
Reduces power consumption by adjusting peak screen brightness.
If you use [Energy Saving] function, brightness of your projector will be affected.
•
[Minimum]/[Medium]/[Maximum]
Applies the pre-set [Energy Saving] mode.
[Picture] [Aspect Ratio Settings]
[Picture] [Energy Saving]
[Just Scan]