Advertisement
Available languages
Available languages
Fix the mounting bracket to the wall using appropriate screws and plugs for the type
u
of wall and weight of the appliance.
Hang the appliance on the wall by placing the opening on the base of the vac over
u
the hooks in the wall mount charging bracket.
Use
u
Place the appliance on the charging bracket whenever it is not in use.
u
Charging the battery (Fig. B)
Make sure that the appliance is switched off. The battery will not be charged with
u
the on/off switch in the on position.
Place the appliance on the charging bracket (5).
u
Plug in the charger. Switch on at the mains.
u
Leave the appliance to charge for at least 21 hours.
u
While charging, the charger may become warm. This is normal and does not indicate a
Warning! Do not charge the battery at ambient temperatures below 10 °C or above 40
°C.
Note: Ensure the appliance is fully seated onto the charging base. If the appliance is
not fully seated then the appliance will not charge.
To switch the appliance on, slide the on/off switch (1) forward to position 1.
u
To switch the appliance off, slide the on/off switch (1) back to position 0.
u
Optimising the suction force
use.
Emptying and cleaning the product.
Warning!
Press the bowl release button (2) and pull the dust bowl (3) straight off.
u
u
tents of the bowl.
u
position.
Warning!
u
u
u
(Original instructions)
ENGLISH
-
9
Advertisement
