Mounting The Bike Handle - Stihl FS 311 Instruction Manual

4 Mounting the Bike Handle

WARNING
For safety reasons, only the cutting attachments
and deflectors and/or limit stops within one line
of the table may be combined with one another.
No other combinations are permitted because of
the risk of accidents.
3.2 Cutting attachments
3.2.1 Mowing heads
1 STIHL SuperCut 40‑2
2 STIHL AutoCut 40‑2
3 STIHL AutoCut 46‑2
4 STIHL TrimCut 41‑2
5 STIHL DuroCut 40‑4
6 STIHL PolyCut 41‑3
3.2.2 Metal cutting tools
7 Grass cutting blade 230‑4
(Ø 230 mm)
8 Grass cutting blade 250‑32
(Ø 250 mm)
9 Grass cutting blade 255‑8
(Ø 255 mm)
10 Brush knife 305‑2 Special
(Ø 305 mm)
11 Brush knife 300‑3
(Ø 300 mm)
12 Shredder blade 270‑2
(270 mm dia.)
13 Circular saw blade 200-22 chisel tooth
(4119), circular saw blade 200-22 HP chisel
tooth (4000)
WARNING
Non-metal grass cutting blades, brush knives,
shredder blades and circular saw blades are not
permitted.
3.3 Deflectors, limit stop
14 Deflector for mowing heads
15 Deflector for grass cutting blades and brush
knives
16 Guard for shredder blades
17 Limit stop for circular saw blades
0458-433-0121-B
3.4 Shoulder straps
18 Full harness must be used
19 Full "deluxe" harness must be used
4 Mounting the Bike Handle
4.1 Mounting the Bike Handle
► Hold the lower clamp (1) and upper clamp (2)
firmly together.
► Loosen the clamp screw (3) – the clamp mold‐
ings are loose once the clamp screw has been
loosened. They are pushed apart by the two
springs (4 and 5).
► Pull out the clamp screw – the washer (6)
remains on the screw.
► Separate the clamp moldings – the
springs (4 and 5) remain in the lower clamp.
English
13