Table of Contents
Advertisement
Security Settings
This enables settings on network information of the WTS invisible to prevent from
undesirable change. When the security is active, the following settings become.
• "Terminal Connection Manager"
* [Configure] tab
• "Terminal Properties"
* [General] tab... [Reset the terminal to factory - default settings]
* [Network] tab
* [Printers] tab
* [PPP] tab
* [ICA] tab
* [System] tab... [Update...], [Security]
PROCEDURE
1.
Click the [Security Enable] box.
2.
Click [Setting Password...].
3.
"Security Password" dialog box is displayed.
[Password] ..........................Enter the password.
[Confirm password:]...........Enter the same password for confirmation
Click [Ok] to return to the "Terminal Properties" dialog box.
Click [OK] to save the settings and close the "Terminal Properties" dialog box.
6. USING THE TERMINAL PROPERTIES
English
95
Advertisement
Table of Contents
