Table of Contents
Advertisement
English
Click [Finish] in the last page to display a "Terminal Settings change" dialog box.
(This dialog box is displayed only when there are changes in the settings.)
Click [Yes] to restart the 630L to activate the changes.
· Click [No] to finish the "WBT Setup Wizard" and display "Terminal Connection
Manager" on the screen. The setting is not activated until the 630L is restarted.
This completes the 630L settings.
The "Terminal Connection Manager" dialog box will be displayed after restarting.
NOTE
• When you are connecting to the WTS with a LAN card, another installation for
a LAN card connection must be completed. Please follow the next page.
• When you are connecting to the WTS with a modem, another installation for a
modem connection (a dial-up connection) must be completed. Please follow
the "3-3. Dial-up Connection", page 36.
3. SETTING UP THE 630L
28
Advertisement
Table of Contents
