Connecting The 630L; Setting Up The 630L - Eizo eClient 630L User Manual

English

2. CONNECTING THE 630L

This chapter explains how to connect the 630L to a WTS.

2-1. Setting up the 630L

Please observe the following cautions when connecting the 630L.
WARNING
Place the 630L on a strong, stable surface.
A unit placed on an inadequate surface may fall, resulting in injury
or equipment damage. If the unit falls, disconnect the power
immediately and have the unit checked by a qualified service
engineer before using it again. Using a unit after it has been
dropped may result in fire or electric shock.
Set the unit in an appropriate location.
* Do not install in a dusty or humid environment.
* Do not place in a location where steam can have direct contact
with the screen.
* Do not place near heat generating devices or a humidifier.

2. CONNECTING THE 630L

10