Appendix C Unit Dimensions - Daikin DCC Series Installation Instructions Manual

7.5 8.5
Y 52 7/8" 52 7/8" 52 7/8"
28 3/8"
13 7/8"
SUPPLY
6 1/4"
Horizontal Discharge
For horizontal discharge, remove supply and return
For horizontal discharge, remove supply and return
duct cover panels from the end of the unit. Save
duct cover panels from the end of the unit. Save all
all washered screws. According to the model size,
washered screws. According to the model size, remove
remove (6 or 8) factory supplied panel clips that are
(6 or 8) factory supplied panel clips that are secured
secured to the base pan, behind the filter access panel.
to the base pan, behind the filter access panel. With
With the insulated side of the panel facing up, attach
the insulated side of the panel facing up, attach the
the clips. Place the provided gasket material com-
clips. Place the provided gasket material completely
pletely around the perimeter of the clip side on both
around the perimeter of the clip side on both panels.
panels. Place the assembled panels over the supply
Place the assembled panels over the supply and return
and return duct openings in the base pan and push
duct openings in the base pan and push down to snap
down to snap panels into place. Ensure the panel is
panels into place. Ensure the panel is evenly seated on
evenly seated on the flanges around the duct openings
the flanges around the duct openings and the gasket is
and the gasket is creating a good seal.

APPENDIX C UNIT DIMENSIONS

10 12.5
58 7/8"
Y
12 5/8"
7 3/8"
RETURN
NOTE
NOTE
5 7/8"
36 3/8"
5 3/8"
31
99 1/8"
6 1/2"
RETURN
Y
SUPPL
7 1/2"
Vertical Discharge (Bottom of Unit)
61 3/4"