Jensen VX7023 Operation Manual page 61

VX7023
8. Touch the "Pair" icon on the unit's Bluetooth user interface screen.
9. A prompt to pair should appear on your mobile phone. Accept the request
and initiate the process.
NOTE: Some mobile phones require a "pass key" or pairing code to
connect. If your phone requires a pass key or pairing code, you will need
to enter this number. The default pairing code for the VX7023 is
"5309".
10. A prompt to enter a PIN number or passkey for the unit should appear. The
default passkey for the unit is "5309".
11. At this point a prompt stating pairing successful should appear. Another
prompt should appear asking connect to the unit, Yes or NO. Touch Yes. The
mobile phone and the unit should connect. The mobile phone should display
a message similar to "Device Connected" and the mobile phone and the unit
are now connected. VX7023 will appear on the mobile phone list of devices.
Managing Incoming Calls
When connected to a Bluetooth mobile phone, the unit will mute audio output,
pause CD play, and change to the Bluetooth screen below when a call is received.
The incoming phone number or assigned name for that number will appear on
the screen. An audible tone will sound from the unit and a graphic display will
appear on the front panel.
1. icon: Touch to answer an incoming call.
2. icon: Touch to end an incoming call.
Bluetooth Incoming Call Screen
61