Jensen VX7023 Operation Manual page 15

VX7023
System Settings Adjustment
To access and adjust system settings:
1. Touch the Settings (
MENU. Sub-menus where adjustments can be made will be highlighted.
Volume Adjustment / Turn On Volume
To increase or decrease the volume level, rotate the rotary encoder knob. The
unit's front panel screen will display the volume level for 2 seconds. The
volume level ranges from 0 to 50. To set the Turn-On volume, press and hold
the rotary encoder knob 1 second while the green volume bar is displayed
after setting the desired volume level. You will hear 2 beeps to confirm the
new Turn-On volume level.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The beep tone can be
disabled through the Setup menu.
Muting the Audio
Press the front panel volume knob (
icon is displayed on the LCD screen. Press the front panel volume knob again to
restore the audio volume to its previous level. Adjusting the volume or using any
of the audio setup features cancels the mute function.
Equalizer Controls
Equalizer (EQ): Adjustment can be made after entering one of the audio/video
sources (Disc, Radio, USB, AV-IN or SXM).
Touch the equalizer (EQ) icon to view the equalizer control screen to select flat
setting, custom user setting, make adjustments to the audio balance and fader
levels or to turn the loudness option ON or OFF. Touch the "Back Arrow" icon to
return to the current source.
) icon on the Main Menu screen to enter the SETTINGS
) to mute the audio from the unit. Mute
15