ViewSonic CDE6520-W User Manual page 29

Power Save
Mode 1 [TCP off, WOL on, auto off]
Mode 2 [TCP off, WOL on, auto on/off]
Mode 3 [TCP on, WOL off, auto on/off]
Power save modes
Mode 1: DC off -> Power off. LED: Red. Power
Save -> Power off, LED: Red
Mode 2: DC off -> Power off, LED: Red. Power
Save -> Power Saving. LED: Orange. Can be
wake up.
Mode 3: DC off -> Back light off, LED: Red Power
Save -> Back light off, LED: Orange. Can be wake
up.
Eco Mode
Set this display to reduce the power consumption
automatically.
Power LED light
Choose to set power indicate LED on or off.
Choose {On} for normal use
Boot on source
Choose to select source when boot up. Input:
select input source when boot up.
Boot on Logo
Choose to enable or disable the picture of Logo
when turn on your display.
The options are:
• {Off}
• {On} (Default)
• {User}
1. If Logo set to ON, ViewSonic logo and
animation ViewSonic logo will show.
2. If Log set to OFF, neither ViewSonic logo nor
animation logo will not show.
3. If Logo set to USER, custom logo option in
settings is not set, then there will be no boot
logo when power on.
4. If Logo set to USER, custom logo option in
settings is set, there will be only custom logo
when power up.
Auto signal detection
Choose to let the display detect and display
available signal sources automatically.
•{Off} - Once a signal is connected, it can only be
selected manually. No signal, set the display to
display the image automatically according to the
search order of each option.
No signal standby
Set the period of time to entry standby mode when
no signal.
HDMI with One Wire
CEC control.
• {Off} - Disable CEC.(Default)
• {On} - Enable CEC.
USB Cloning
Save the OSD menu configuration into USB drive.
USB Auto Play
Set to ON, the display will copy media file from
external storage to internal storage then to play
the media file automatically.
Switch on state
Select the display status used for the next time
you connect the power cord.
• {Power off} - The display will remain off when
the power cord is connected to a wall outlet.
• {Forced on} - The display will turn on when the
power cord is connected to a wall outlet.
• {Last status} - The display will return to the
previous power status
WOL
Choose to turn on or off the wake on LAN function.
Choose from : {Off} / { On}
Monitor ID
Set the ID number for controlling the display via
the RS232C connection. Each display must have
a unique ID number when multiple sets of this
display are connected. Monitor ID number range is
between 1 to 98. 99 is reserve for all display.
Language
Select the language used in the OSD menu.
The options are: English/Deutsch/ 简体中文 /
Français/Italiano/Español/ Pyccкий/Polski/Türkçe/
繁體中文 .
20