Advertisement
PSE Preset loads
stxPSE:a;
a: 0–3 (0 Preset1, 1 Preset2, 2 Preset3, 3 Factory Load)
Loads the preset.
ACK is returned when the unit correctly receives the command.
Xon Flow control (11H)
Xoff Flow control (13H)
Commands sent by VC-300HD
ACK Response when correctly received
stxACK;
Sent when the sent command was received correctly.
ERR Error information
stxERR:a;
a: 0 (syntax error) There was a syntax error in the received command.
5 (out of range error) The parameter of the received command is out of range.
VER Version information
stxVER: "a", "b", "c";
a: Device name (VC-300HD)
b: Version
c: Reserved
This is sent when the unit receives the VER command. The version information is an ASCII string.
SYN Sync status response
stx:SYN:a,b;
a: 0–2 (0 external sync lock, 1 video input sync, 2 internal)
b: 0–2 (0 unlock, 1 chase, 2 lock)
This is sent when the unit receives the SYN command.
VIF Request for the video input format
stxVIF:"a";
a: Format string, "- -" when the input format is not defined
This is sent when the unit receives the VIF command.
VOF Request for the video output format
stxVOF:"a";
a: Format string, "- -" when the output format is not defined
This is sent when the unit receives the VOF command.
DAT Bulk dump response
stxDAT:a,[b,[c,d,e]];
a: Menu number
b: Parameter value
Menu 990 Sent when bulk dump is executed or when DAT:990; is received.
Xon Flow control (11H)
Xoff Flow control (13H)
2
1PS
Advertisement
