Specifications - Shindaiwa 305s Operator's Manual

SPECIFICATIONS

• Remove chain and guide bar.
• Drain fuel tank completely. Press purge bulb 6-7 times to remove
remaining fuel from carburetor then drain the tank again. Close choke,
start and run the engine until it stops due to lack of fuel.
• Allow engine to cool. Remove the spark plug lead from the spark plug.
Remove the spark plug. Pour 7 cc (0.25 oz.) of fresh, clean, two-stroke
engine oil into the cylinder through the spark plug hole.
• Store in a dry area, free from dust.
Do not store in an enclosure where fuel fumes may accumulate
or reach an open flame or spark.
Do not lend or rent your chain saw without the Operator's
Manual.
Note:
• For future reference, you should keep this Operator's Manual.
• If this Operator's Manual becomes illegible or is lost, please contact
your ECHO dealer, or go to www.echo-usa.com.
SPECIFICATIONS
Model
Length
Width
Height
Dry weight
Engine
Displacement
Bore
Stroke
Compressions ratio
Carburetor
Spark plug
Fuel tank capacity
Fuel/Oil Ratio
54
Shindaiwa 305s
396 mm (15.6 in.)
232 mm (9.1 in.)
273 mm (10.7 in.)
4.0 kg (8.8 lb.) Without chain and guide bar
Air-cooled two-stroke single cylinder
3
30.5 ml (1.861 in.
36.0 mm (1.417 in.)
30.0 mm (1.181 in.)
6.7:1
Diaphragm type
NGK BPMR8Y (Gap 0.65 mm [0.026 in.])
250 ml (8.45 US. fl. oz.)
50:1
)
© 10/2020 ECHO Incorporated
305S
X7503275503