Table of Contents
Advertisement
305S
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
ALWAYS stop engine, disconnect spark plug, and make
sure all moving parts have come to a complete stop before
removing obstructions, clearing debris, or servicing unit.
DO NOT start or operate unit unless all guards and
protective covers are properly assembled to unit.
NEVER reach into any opening while the engine is running.
Moving parts may not be visible through openings.
Using improper replacement components or removing safety
devices may result in serious or fatal injury.
Unit includes safety devices that reduce the likelihood of
kickback:
Chain brake - brake actuated by kickback energy, not
◆
manual activation.
Reduced-kickback guide bar - reduced nose radius guide
◆
bar.
Low-kickback saw chain - saw chain that meets ANSI
◆
kickback performance requirements when configured with
the bar/chain recommendations in this manual.
Front hand guard - a structural barrier between the front
◆
handle of a chain saw and the guide bar.
Periodically Check fuel system (fuel lines, vent, grommet, fuel
tank, and fuel cap) for leaks especially if the unit is dropped. If
damage or leaks are found, do not use unit, otherwise serious
personal injury or property damage may occur. Have unit
repaired by an authorized servicing dealer before using.
X7503275503
© 10/2020 ECHO Incorporated
SAFETY
11
Advertisement
Table of Contents
