Table of Contents
Advertisement
305S
7.
Securely hold the chain saw and pull starter handle several times until
first starting sound.
8.
Push choke control knob all the
way IN (OPEN
position).
9.
Pull starter handle to start the
engine.
Note: Do not pull starter rope
out to the maximum
possible position.
Note: Do not allow recoil handle
to snap back against the
casing.
Note: If engine does not start
after 5 pulls, repeat
instructions.
After starting the engine, immediately squeeze and then
◆
release throttle trigger to release fast idle throttle latch,
otherwise severe brake damage may occur.
Never use fast idle throttle latch for cutting.
◆
Use the fast idle throttle latch only in starting.
◆
Note: Do not increase engine speed while chain brake is locked.
Severe brake damage will result.
X7503275503
© 10/2020 ECHO Incorporated
choke
OPERATION
31
Advertisement
Table of Contents
