Edimax PS-3103P User Manual page 76

1. The PrintSir
networked print server host.
2. The host name should be the name (or IP address)
that you have assigned to the PrintSir.
3. The printer name (or queue name) on the remote
host should be lpt1, lpt2 or lpt3, the name of the
parallel port on the PrintSir.
You will need to perform the tasks below, logged in as
the superuser (root).
printing,
1. Optionally, assign a name corresponding to the
PrintSir's IP address. You can add this address
to the /etc/hosts file, by adding a line such as:
203.66.191.186
2. Create a spool directory for the printer in the
same
normally kept on the machine, such as /var/spool
or /var/spool/lpd:
mkdir /var/spool/lpd/pserverd
chown daemon /var/spool/lpd/pserverd
chgrp daemon /var/spool/lpd/pserverd
chmod 775 /var/spool/lpd/pserverd
3. Add an entry to the host's /etc/printcap file,
similar to the following:
printer-name:\
should
To configure your Unix host for
directory where
76
be treated as
pserver
spool directories
a BSD
are