Edimax PS-3103P User Manual page 55

5.2.2.2 Configuring as Remote Printer Mode
This remote printer feature is not available for the
10/100Mbps 3-port PrintSir models. Make sure that you
have created the NetWare print server with Type
Remote using PCONSOLE utility before you configure
the PrintSir.
PCONSOLE, please refer to NetWare's manual. You
can set up the NetWare print server and print queue
objects by following the steps below:
1. Run the NetWare PCONSOLE program.
2. Change the current file server, if necessary,
using the Change Current File Server menu
selection.
3. Choose
selection.
4. Press the Insert key to add a new print queue.
5. Type in a print queue name, such as "PQ" or
"Q1".
6. You have now successfully created the print
queue that your NetWare print server will serve.
Press the Escape key until the Available Options
main menu is displayed.
7. Select Print Server Information.
8. Press the Insert key to add a new NetWare print
server.
9. Press Enter to select the newly created print
server.
For more detailed information about
the Print Queue
55
Information menu