Starting Warm Engine; Stopping Engine - Echo PB-760LNH Operator's Manual

PB-760LN

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the
choke.v
1. Throttle Position Lever
Move throttle position lever (A) to
IDLE position.
2. Purge Bulb
Pump purge bulb (D) until fuel is
visible. Pump bulb an additional 4
or 5 times.
3. Recoil Starter
Pull recoil starter handle (E) and
engine should start. Do not use
choke (C)
Note: If engine does not start after 5 pulls, use cold start
procedures.

Stopping Engine

- PB-760 H
1. Throttle Position Lever
Move throttle position lever (A) to
IDLE position and allow engine to
return to idle before shutting off
engine.
2. Throttle Position Lever
Move throttle position lever (A) to
"O" (STOP) position.
X7531125905
© 10/19 ECHO Incorporated
PB-760 H
PB-760T
A
D
PB-760 H
PB-760T
A
OPERATION
A
C
E
A
27