Table of Contents
Advertisement
SYMPTOM
Washer does not start.
Washer will not spin.
Door does not open.
Wash cycle time delayed.
The washer will stop during
spinning .
Spinning is insufficient.
30
TROUBLESHOOTING GUIDE
CAUSE
Electronical power cord may not be
plugged in or connection may be loose.
House fuse blown, circuit breaker
tripped, or a power outage has
occurred.
Water supply tap is not turned on.
Check that the door is firmly shut.
PFE
error due to much detergent and
unsuitable detergent.
SOLUTION
Make sure plug fits tightly in wall outlet.
Reset circuit breaker or replace fuse.
Do not increase fuse capacity.
If problem is a circuit overload, have it
corrected by a qualified electrician.
Turn on water supply tap.
Close the door and press the
Start/Pause button. After pressing the
Start/Pause button, it may take a few
moments before the clothes washer
begines to spin. The door must lock
before spin can be achieved.
Once started, the door can not be
opened for safety reasons.
Wait two minutes before opening the
door to give the electric locking
mechanism time to release.
The washing time may vary by the
amount of laundry, water pressure,
water temperature and other usage
conditions.
If the imbalance is detected, the wash
time shall be increased.
If PFE error mode was displayed on
the control part, in order to solve this
problem, first turn off the power of the
washing machine, second turn on the
power pressing Power button, third
press SPIN button and last press
Start/Pause button.
Advertisement
Table of Contents
