Daewoo DWD-HD94A2 Service Manual page 13

3) Remove the nut using the 10mm hex wrench and
remove the earth terminal from the HEATER.
BLDC MOTOR
1) Remove the nut using the 17mm hex wrench.
3) Remove six screws using the 10mm hex wrench and
connectors from the STATOR.
12 DIRECTION FOR DISASSEMBLY
4) Loose the nut of the HEATER and pull out the
HEATER.
2) Pull out the ROTOR.
4) Separate the STATOR from the TUB.