Noise And Vibration; Intended Use; Air Supply And Operation - Ryobi RA-NBS1664-S Operator's Manual

Staple type
TOOL
Magazine capacity 100 nails
Air inlet size
Air hose size
Air consumption
Working pressure
range
Exhaust
Tool weight
2.46 kg

NOISE AND VIBRATION

Noise according to EN 12549:1999 and EN ISO 4871
A-weighted sound
L PA
pressure level
Sound power level L WA
A-weighted sound
pressure level(at L PA
C-weighted sound L PC,peak
pressure level K PC,peak =2.5 dB
Vibration according to ISO 8662-11:1999
ah,W=11.8 m/s 2 ,
Vibration in the
K=1.5 m/s 2
handle

INTENDED USE

The tool can be used for the purposes listed below:
Door and window architraves and moulding
Window glazing bead
Door jambs
Skirting boards
Crown mouldings
Panelling and lining
Cabinetry
Shelving
Furniture assembly
6000 series narrow
crown staples – 1.25
Staple range:
16 - 40 mm
Collation angle: 0°
PA =2.5 dB
WA =2.5 dB
UNPACKING
This product has been shipped completely assembled.
PA =2.5 dB
Packing list
4
Upholstery
Picture framing

AIR SUPPLY AND OPERATION

before connecting to the air supply.
Required air pressure range of 4.8 - 8.3 bar (70 - 120
Disconnect the product from the compressed air supply
before changing accessories or making adjustments.
Connect the product to the air hose.
Push the tool against the work surface and squeeze
the trigger to drive a fastener.
Do not use any additional force upon the product.
WARNING
Ensure the air supply is clean and does not exceed
high an air pressure and unclean air will shorten the
product's life due to excessive wear, and may be
dangerous causing damage and/or personal injury.
ASSEMBLY
Carefully remove the tool and any accessories from
the box. Make sure that all items listed in the packing
list are included.
WARNING
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
– Brad nailer/stapler
– Wrench kit
– Air tool oil
– Canvas bag
– C1 brad nails 20 mm x 500
– C brad nails 35 mm x 500
– Narrow crown staples 22 mm x 500
– Operator's manual