Output Bin Full. Remove Paper - Samsung ProXpress 402 Series Service Manual

4. Troubleshooting
► Error Code
M3-2130
► Error message

Output bin full. Remove paper.

► Symptom
The machine detected that the output tray has got full or the bin-full sensor is defective.
► Troubleshooting method
1) Remove the paper on the output tray.
2) If the problem persists, check the followings.
3) Remove top cover.
4) Check if the Bin-full Sensor connector is connected properly. Reconnect it or replace the Bin-full sensor(.
(Refer to 3.3.16)
4-56 Copyright© 1995-2016 SAMSUNG. All rights reserved.