Too Much Paper In Output Bin Tray. Remove Printed Paper - Samsung Xpress M282 Series Service Manual

► Error Code
M3–2130
► Error message

Too much paper in output bin tray. Remove printed paper.

► Symptom
The machine detected that the output tray has got full or the bin-full sensor is defective.
► Troubleshooting method
1) Remove the paper on the output tray.
(The maximum loading capacity is 150 sheets based on standard paper(80g/m2).)
2) Check if the Bin-full Sensor connector is connected properly. Reconnect it or replace the Bin-full sensor.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Troubleshooting
4-32